Pumps & Pump Parts

A-C Pump

Pumps and parts for pumps formerly known as Allis Chalmers Pump Company.  We have the largest stock of A-C 2000 Series pumps and parts in the Midwest.  The 2000 Series has recently been known as ITT 2000, G&L 2000 and ITT A-C 2000 Series.  Currently offered as the A-C 2000 Series it is the best heavy duty process water pump in the industry.  We also support all pumps and parts marketed under the A-C pump, ITT industries name.

Goulds G&L

Light duty industrial and commercial duty stainless steel cast iron, cast iron bronze fitted and centrifugal pumps; multistage high pressure centrifugal pumps; submersible pumps.  Large inventory of NPE series pumps for immediate shipment.

Warren-Rupp (SandPIPER) – A Division of IDEX

Air powered double diaphragm pumps in ¼″ to 4″ with ball and flap type check valves.  Handles solids up to 3″.  Available in standard or spill containment configuration.  Materials include cast iron, aluminum, stainless steel, polypropylene, Kynar and food grade.  Batching system and stroke counter available.  Custom filter press pumping systems available. 

Innomag Pumps

The Innomag Mag Drive pump is the result of years of experience of lined magnetic driven knowledge.  The design incorporates thrust load balancing that is critical to longevity of pump life.  Internal flow passages allow for solution flow through the bearing for extended life.  Thrust loads are absorbed by a unique internal pressure balance system.  Zero leak design that meets ANSI B73.1 dimensional and flow standards.  Process pumps for corrosive solutions -20° F to 250° F.

Gusher Pumps & Ruthman Gusher Pump Systems

Gusher pumps and Din to DIN manufactures pumps for a wide range of applications including Din specifications, ANSI specification, machine tool and centralized coolant systems, automatic paint systems, industrial spray washers, filtration systems, phosphate and bonderizing lines just to name a few.

Sequence 1000

Chemical duty industrial pumps constructed of Noryl or polypropylene, equipped with an E9VC mechanical seal with all metal parts isolated from the fluid; this is an inexpensive close-coupled pump that can handle a wide variety of chemical solutions.  We have a large inventory of pumps, motors and parts for quick shipment when needed.

Price Pump Company

Price® Pump Company is a leading manufacturer of 50 & 60 hertz centrifugal pumps ranging in flows of 0.5 GPM to 580 GPM (1.89 1/min to 220 1/min) and pressures up to 377 feet (115 meters) for a broad range of industries.  Those industries include:  O.E.M., agricultural, chemical, laser, semiconductor, pollution control, water and waste treatment, reverse osmosis, petro-chemical, construction and many other industrial applications.  Price pumps are suitable for liquids ranging from water, oils, solvents and chemicals to strong acid or alkaline solutions.  Price pumps offer dependability and quality at a very competitive price.  And if you’re in a hurry, Price Pump has a VIP (Very important Pump) program which offers same day shipments for most of our pumps.

Carver Pump Company

The Carver line includes both horizontal and vertical end suction, multistage pumps.  Together, they cover a hydraulic range to 10,000 GPM and 2,800 ft. TDH.  GHF and GHC series horizontal pumps are available in close coupled or frame mounted arrangements.  These pumps are offered in cast iron, 316 stainless steel fitted cast iron or all 316 stainless steel executions.  GVC and GVT series vertical pumps are available as standard tank mounted units or the more operator-friendly top pull-out designs for depths to 36 inches.  For anything deeper, the GVS series sump pump is offered for depths to 20 feet.  The RS series ring section, multistage pumps are available as horizontal or vertical units.  The RS6 has 600 lb. flanges for heads to 1,900 ft. while the RS9 has 900 lb. flanges for discharge heads to 2,800 ft.

LaBour / Taber Pumps

LaBour Pumps designs tough, versatile chemical process pumps, sump pumps and ANSI pumps including horizontal pumps, vertical sump pumps and self-priming pumps.  Quality engineering, innovative design, rugged heavy duty construction and customer commitment distinguished LaBour Pumps in the pump industry.

Marlow Pumps / ITT Industries

The general industry product line consists of self-priming high capacity and solid pumps including our world-renowned Trash Hog® and Prime Line® pumps.  The industrial offering also includes Whirlflo® pumps for solids handling and self-priming centrifugal for pumping petroleum products.

Pacer Pumps

Pacer manufactures a complete line of corrosive resistant pumps molded from tough modern Thermoplastics.  Pumps for transferring, recirculating, spraying, cleaning or filtering and metering.  Horizontal centrifugal pumps direct drive with single seals or magnetic seal-less pumps.  Self-priming centrifugal pumps or immersion cantilevered pumps with single bearings, for hot or cold solutions.

MTH Pumps

Our current standard product line consists mainly of regenerative turbines covering capacities from 1 to

150 GPM and pressures up to 1000 PSI.  We also manufacture a line of small centrifugals in ranges up to 60 PSI and 100 GPM.  Pumps are available in all iron, all bronze, bronze fitted, bronze ring and 316 stainless steel.  The self-adjusting impellers featured in the MTH turbine designs assure dependable performance, with low maintenance and long operating life.  Centrifugals feature stainless steel impellers and adjustment screws to fine tune and occasionally renew performance.  There are many other options available to handle a variety of needs and all pumps are assembled and tested to customer specifications before leaving the factory.

Viking Pump / IDEX

Viking Pump manufactures positive displacement pumps and accessories for industrial and sanitary pumping applications.  Products include:  Internal Gear Pumps, External Gear Pumps, Lobe Pumps, Gear Reducers , Strainers, Controllers and Pump Systems

Goulds Vertical Turbine Pumps

Cast-iron bronze fitted bowl assembly with open or enclosed column assembly in carbon steel construction.  Above or below ground discharge with cast iron discharge head.  Motor or engine driven.  Flow up to 8000 GPM and 1000 ft. TDH.  Alloy construction is available.

LMI Pumps

LMI’s family of electronic metering pumps offer:

• Adjustable stoke frequency and the flexibility of up to 1000:1 turndown ratio.
• Manually adjustable stoke length provides accurate pump output adjustment.
• NEMA 4X / IP65 enclosures for protection against corrosive environments.
• Time tested electronics for reliable, repeatable performance.
• Totally encapsulated for protection against moisture and corrosive conditions.
• Priming valves with FlourofilmTM diaphragms and ramp style knobs for “hands free” priming.

Aquavar Pump Control

The AQUAVAR does more than just change motor speed.  It truly manages your pump performance to match a wide range of system conditions and requirements.  By combining the latest variable frequency drive technology and our patented pump control software, we have created an extremely versatile centrifugal pump controller.  The AQUAVAR can be used in virtually any centrifugal pumping system with varying flow or pressure demand.

Pump Repair

We repair and provide parts for all makes and models of pumps.  With our large inventory of parts and our nation wide network of suppliers, we can usually repair or replace faulty parts in a few days.