Pumps & Pump Parts

AC PumpAC 2000 Series PumpAC 2000 Pump

AC 2000 SERIES PUMPS BY ITT/XYLEM - Frame mounted and close coupled.

Process Engineering & Equipment Company (PECO) is a master distributor of pumps and parts formerly known as Allis Chalmer Pump Company.  PECO retains the largest supply of AC 2000 Series pumps and parts in the USA.  The 2000 Series has recently been known as ITT 2000, G&L 2000 and ITT AC 2000 Pump Series.  Currently offered as the AC 2000 pump it is the best heavy duty process water pump in the industry.  PECO also support all pumps and parts marketed under the AC pump, ITT industries name.

Capabilities:                                           REQUEST QUOTE - REQUEST INFORMATION 
Capacity: to 3100 GPM                                                              CLICK HERE
Head: to 360 ft. TDH
Temperature: to 250degF.

Benefits:
Rear pull-out, center line discharge and hydraulic balance - three highly desirable design features are combined to provide reliable performance at low operating costs.

The highly efficient AC 2000 Series pump is also unsurpassed in energy conservation, an increasingly important consideration as energy costs continue to climb.
Whenever end suction frame mounted pumps are needed, the AC 2000 pumps offers more benefits per dollar spent than any other pump at any price.

  • Top center line discharge design - Simplifies piping layouts,reduces piping strain and is self-venting. Feet are castintegrally with casing for sturdier installation.
  • Rear pull-out makes servicing simpler, faster. The rotating element is easily removed without disturbing piping ordriver when spacer type coupling is used.
  • Hydraulic balance of impeller extends bearing life, assuressmoother, quieter operation.
  • Available in 30 sizes.
  • Available with choice of packing or mechanical seal.
  • Working pressure: varies by size 175-215 psi with 125 psi ANSI flanges.

PUMP CURVES


Goulds G&L, XYLEMGoulds Pumps

Goulds G&L produces light-duty industrial and commercial-duty centrifugal pumps forged in stainless steel, cast iron and bronze.  Process Engineering & Equipment Company maintain a large inventory of the NPE Series "pump in a box" for immediate delivery.

G&L , a part of the Goulds Pump family, now a division of Xylem, is a worldwide leader in the manufacture of centrifugal pumps and ancillary components. The line consists of the following:

  • Stainless steel, bronze, and iron end-suction pumps with flows to 5,000 GPM and 400' of head for water and mild-chemical duty applications
  • Multi-stage pumps with flows to 350 GPM and heads to 800In addition
  • Texas Turbine division of Goulds which manufactures vertical turbines for larger flow and head requirements.
  • Aquavar Variable Frequency Drive units (VFD's) for variable-torque speed control of centrifugal pumps
  • Self-priming pumps
  • AquaBoost Water booster systems
  • Texas Turbine Vertical Turbine Pumps

The breadth and depth of the G&L product offering means that they can fulfill a wide range of applications. Process Engineering & Equipment Co, has a large inventory of ready to ship G&L product.


Goulds Water TechnologyGoulds Water Technology manufactures centrifugal and turbine pumps, controllers, variable frequency drives, and accessories for agricultural, building trades, commercial, and light industrial water applications. You not only get the latest in pump design and technology from Goulds Water Technology, you get more than 150 years of pump manufacturing know-how that includes most of the major innovations in pump engineering and materials. Various material of construction. Threaded or flanged column. Above or below ground discharge. Flow up to 20,000 GPM and 500 TDH. Alloy construction are available


Air Diaphram Pumps by Warren-Rupp (SandPIPER) - A Division of IDEXAir Diaphram Pumps

Warren Rupp manufactures air-powered, double-diaphragm pumps with 1/4'' to 4'' piping with ball-and-flap check valves.  A Warren Rupp diaphragm pump can manage solids of up to 3'', and is available in standard or spill containment configuration.  Warren Rupp air diaphragm pumps are forged using a variety of materials including cast iron, aluminum and stainless steel, and they can be coated using polypropylene or Kynar, rating them as food grade.  Batching systems and stroke counters are available with each unit.  Warren Rupp custom filter press pumping systems are available from our West Michigan location.


MP Pump ChemfloMP - FlomaxMP Pumps 

Located in Fraser Michigan, MP PUMPS Inc. has been providing high quality centrifugal pumps for 70 years to the Industrial, Marine, Agricultural, Military and Transportation markets. Our brands include Flomax(r) self priming pumps; Chemflo(r) stainless steel end suction pumps; and Tempuflo hot oil pumps. We also provide a wide range of other products to meet your fluid handling needs.

Chemflo Stainless Pump to 270 gpm and 460'tdh

Flomax Self-Priming Pump to 750 gpm

Self-Priming Petroleum Pump - Model PG - compatible for gasoline, kerosene, avgas & jetfuel

MP Pumps has specifically reengineering its popular Flomax Self-Priming Series for compatibility with clean non-abrasive petroleum products. Transfer and delivery of various fuels such as gasoline, ethanol, biodiesel, and fuel oils are just a few of the petroleum based products the Flomax Series is suitable for handling.  Long recognized as the leader in self-priming applications, the Flomax Series addresses today's fuel market by offering:

  • Five (5) performance models
  • Various drive options
  • Specific mechanical seal offerings
  • Materials of construction compatible for three (3) distinct fuel classifications

By classifying various fuels into (3) distinct segments, MP Pumps can recommend that its design is capable of handling the specific fuel groups without incurring the additional cost associated with "one pump for all fuels".


LoBee Pumps 

Lobee Pump and Machinery Company Manufactures Pumps and Accessories for the Industrial Marketplace including Machine Tool, Plastics, Chemical, Agriculture, Food/Beverage, Pharmaceutical, Pulp/Paper, Marine, Automotive, Construction, Mining and Energy industries. Wherever liquids and/or vapors are transferred we are there...

Lobee PumpsLiquid Ring Pump

Our Gear Pumps are external tooth spur type for positive displacement operation and are designed for performing between 0 -1800 RPM, with flows to 90 GPM. Port sizes from 1/8" to 2". Pressures to 150 PSI continuous. Shaft seals available include Acrylic/Graphite or PTFE packing, Buna lip seal and John Crane(tm) Type 1, 9, or 2106 mechanical.

Our Liquid Ring Pump Models CLR 1800 RPM, Models CHLR 3600 RPM, will deliver up to 80 GPM, 100 PSI (230' TDH), Vacuum to 28"Hg +. Port sizes are 1", 1 1/2" and 2" NPT. Shaft seals available include acrylic/graphite or PTFE packing and John Crane(tm) Type 2106, 1 or 9 mechanical. All Bronze and all 316 Stainless Steel construction are available as well as the standard Cast Iron with bronze impeller.

Vertical Sump PumpThe toughest Vertical Sump Pump in the industry, our Floor Mount and Suspended pumps are designed for continuous duty operation up to 130 GPM (single) and 80' Dynamic Head. Standard sump depths up to 10', longer column lengths available for special applications. All Bronze or 316 Stainless Steel construction models are built from stock. We offer Water Tight and Explosion Proof switches, Premium Efficient, Hazardous location motors and Duplex Pump packages to 260 GPM.                                                                                                                                                   

Innomag PumpsInnomag Pumps

The Innomag Mag Drive pump results from years of magnetic-driven Innomag experience and knowledge.  The Innomag design integrates thrust load balancing critical to durability and endurance.  Innomag designed the internal flow passages to allow solution to flow through the bearing for extended life.  Thrust loads are absorbed by a unique internal pressure balance system.  The Mag Drive system handles corrosive solutions in temperatures ranging from -20deg F to 250deg F, and a zero leak design meets ANSI B73.1 dimensional and flow standards.  PECO is the West Michigan distributor of Innomag pumps.

INNOMAG SOLIDS HANDLING

The illustration to the right shows the solids which are in the stream of water while behind the shaft (as indicated by the read line) there are no solids which keep the bearings and pump shaft operating as designed.  Leakage past the back ring allows particles to come in contact with the inner magnets and may cause failures.  This 0.005" clearance keeps solids out but allows liquids to balance the impeller.

THRUST BALANCING

The revolution of impeller balancing has substantial reliability and durability.  This thrust is a force in the mag-drive and if improperly applied can be very destructive.  Innomag however has designed this technology with suction pressure pluse front impeller pressure which both lead to a balance pressure for peak performance.

CORROSION RESISTANCE

All Innomag components are molded with a chemically inert ETFE or PFA fluoropolymer.  These materials are designed for high corrosion resistance across a wide range of temperatures.  The Innomag pump also has a double welded magnet assembly which stops corrosive materials from attackign the magnets.  

QUALITY COMPONENTS

Composite housings, exterior protection, SiC components, single piece impellers, and welded inner magnet are all parts which give this pump the edge on technology for a superior product.  


MDM Pumps / Sequence Pumps / Advance Pumps

Sequence Pumps 1000

Advance 1000 / Sequence 1000

These are chemical duty industrial pumps constructed of Noryl or polypropylene, equipped with an E9VC mechanical seal with all metal parts isolated from the fluid; The Sequence 1000 pump is an inexpensive close-coupled pump that can handle a wide variety of chemical solutions. Process Engineering & Equipment Co. has a large inventory of Sequence 1000 pumps, motors and parts for immediate quick shipment when needed. Sequence 1000 pumps are also widely used by consumer pond makers as well. Contact us now for Sequence 1000 pump orders large or small.

Sequence Pumps 3000

Advance 3000 / Sequence 3000

The Advance 3000 was designed to meet the demand of low flow, high-pressure applications, while utilizing the compatibility of Noryl(r) wetted parts. The enclosed impeller design ensures long life and durability. When used with the patented Impenatra (r) Seal, the fluid does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys. The Advance 3000 has multiple drain locations, allowing for several discharge orientations.

Sequence Pump Genesys 2x3x6

Genesys 2x3x6 Model

The Genesys is a pump interchangeable 2X3X6 model, which conforms to the ANSI specification B73.1 envelope dimensions. This GENESYS(r) pump is non-metallic, end-suction centrifugal pump which is used for highly efficient pumping solutions.

The construction of the GENESYS(r) is a composite which has no wetted metal parts lending itself as a great application for most aggressive chemistries. The closed-impeller and time-tested volute design render performances up to 500 GPM and 180' of shut off head. And if that isn't enough, it can produce peak performances at 81% efficiency! You won't find that anywhere else in the pump industry today!

A small example of chemicals that can be pumped with our Sequence products are as follows:

  • Acetic Acid (10%)
  • Nitric Acid (10%)
  • Hydrochloric Acid (10%, 37%)
  • Sulphuric Acid (10%, 60%)
  • Demineralized Water
  • Sodium Hydroxide (10%)
  • Ammonium Hydroxide (10%)
  • Sodium Bicarbonate (SAT.)
  • Ammonium Phosphate (SAT.)
  • Potassium Bicarbonate (SAT.)
  • Nickel Plating Solutions
  • Ferric Chloride (SAT.)
  • Phosphoric Acid
  • Ethylene Glycol


Price Pump CompanyPrice Centrifugal Pumps

Price Pump Company is a primary producer of 50- & 60-hertz centrifugal pumps for a myriad of industries ranging in flows from 0.5 GPM to 580 GPM (1.89 1/min to 220 1/min) and pressures of up to 377 feet (115 meters).  The list of applications for these pumps includes O.E.M., agricultural, laser, chemical, pollution control, semiconductor, reverse osmosis, water and waste treatment, construction, petro-chemical and many other industries.  Price pumps are suitable for many types of liquid such as oils, water, chemicals and solvents as well as strong acid or alkaline solutions.  Price pumps offer reliability and superiority at a competitive price.  And if you're in a hurry, Price Pump has a VIP (Very important Pump) program which offers same day Price Pump shipments from West Michigan for most of our Price pumps.


Carver Pump CompanyCarver Pumps

The Carver line includes both horizontal and vertical end suction, multistage pumps.  Together, Carver pumps cover a hydraulic range up to 10,000 GPM and 2,800 ft. TDH.  GHF and GHC series horizontal pumps are available in close coupled or frame mounted arrangements.  Carver pumps are offered in cast iron, 316 stainless steel fitted cast iron or all 316 stainless steel executions.  Carver GVC and Carver GVT series vertical pumps are available as standard tank mounted units or the more operator-friendly top pull-out designs for depths to 36 inches.  For anything deeper, the Carver GVS series sump pump is offered for depths to 20 feet.  The Carver RS series ring section, multistage pumps are available as horizontal or vertical units.  The Carver RS6 has 600 lb. flanges for heads to 1,900 ft. while the Carver RS9 has 900 lb. flanges for discharge heads to 2,800 ft.


LaBour / Taber Pumps

LaBour Pumps devises sturdy, adaptable chemical-process pumps, sump pumps and ANSI pumps including horizontal pumps, vertical sump pumps and self-priming pumps.  Superior engineering, innovative design, heavy-duty construction and customer commitment set LaBour Pumps apart from the rest of the pump industry.


Pacer PumpPacer Pumps

Pacer Pumps provides a variety of pumps for the industrial market, from the popular S Series and I Series, to our Magnetic Coupled, Vertical, Drum and Hand Operated Pumps. Browse our Industrial Pumps pages to learn more about the most popular pumps for the industrial market, then contact Process Engineering & Equipment Co. today to learn how a Pacer pump can help you with your specific industrial application.


MTH PumpMTH Pumps

MTH Pumps is a commercial and industrial pump manufacturer serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, water services, refrigeration, petroleum, as well as many chemical process applications. Our standard product lines include mechanically sealed regenerative turbines for low flow, high pressure applications (1000PSI & 150GPM) as well as a line of small centrifugal's (60PSI & 100GPM). Our custom engineered products include sealless canned versions of our turbine product lines


Viking Pump / IDEX

Viking Pump produces positive displacement pumps and accessories for industrial and sanitary pumping applications.  The Viking line includes external gear pumps, internal gear pumps, gear reducers, lobe pumps, controllers, strainers and pump systems


Goulds Vertical Turbine Pumps

Goulds turbine pumps are forged in cast-iron with a bronze fitted bowl assembly in open or enclosed column assembly in carbon steel construction.  These pumps offer above or below ground discharge with cast iron discharge heads and are either motor or engine driven.  Alloy construction is available for these pumps, which produce flow rates of up to 8000 GPM and 1000 ft. TDH.


LMI Pumps

LMI's family of electronic metering pumps offer:

  • Adjustable stoke frequency and the flexibility of up to 1000:1 turndown ratio.
  • Manually adjustable stroke length providing accurate pump output adjustment.
  • NEMA 4X / IP65 enclosures for protection against corrosive environments.
  • Time tested electronics for dependable, repeatable performance.
  • Total encapsulation for protection against moisture and corrosive conditions.
  • Priming valves with FlourofilmTM diaphragms and ramp style knobs for "hands free" priming.

Aquavar Pump Control

The AQUAVAR does more than just change motor speed; it truly manages your pump performance to match a wide range of system conditions and requirements.  By combining the latest variable frequency drive technology and our patented pump control software, we have created an extremely versatile centrifugal pump controller.  The AQUAVAR can be used in virtually any centrifugal pumping system with varying flow or pressure demand.


Pump Repair

PECO repairs and provides parts for all makes and models of pumps.  With our large inventory of parts in West Michigan and our nation-wide network of suppliers, we can usually affect Michigan pump repair or replace faulty parts within a few days.